rebuildhydrauliccylinder.comPublished by Winding AI, Inc., the company that makes Mechy See the steps

rebuildhydrauliccylinder.com › Guides › Seal kits

Hydraulic cylinder seal kits: how to find the right rebuild kit

A hydraulic cylinder seal kit holds every seal, wear ring and O-ring one cylinder needs. Find yours by the cylinder maker’s marking or part number first, then the bore and rod size, then the machine model. The 11 kits we read on November 16, 2026 cost $14.25 to $99.59; sellers also call them hydraulic cylinder rebuild kits or hydraulic cylinder repair kits.

Published November 16, 2026 · Updated November 16, 2026. Part of rebuild hydraulic cylinder: steps, safety and costs.

What hydraulic cylinder seals are in a kit?

A hydraulic cylinder seal kit holds the piston seals, the wear rings, the rod seal, the wiper and the O-rings, the parts listed in Degelman’s 2016 cylinder repair guide. Each one does a different job:

  • Piston seal: stops oil passing the piston, so the cylinder holds a load instead of drifting.
  • Wear rings: keep the piston and gland centered so metal doesn’t touch the bore or rod.
  • Rod seal (Degelman’s kit uses a U-cup): keeps oil in where the rod leaves the gland. A wet rod is usually this seal.
  • Wiper: scrapes dirt off the rod as it comes back in.
  • O-rings: seal the gland to the barrel and the piston to the rod, which don’t move against each other.

A wire-ring cylinder’s kit may add a plastic removal ring, and HW Part Store’s John Deere 300E kit ($52.24, read November 16, 2026) includes one.

How do you find the right hydraulic cylinder seal kit?

To find the right hydraulic cylinder seal kit, read the cylinder’s own marking first, because size alone isn’t enough: Oxbo’s seal kit sheet lists a Lion kit (401806), a Prince kit (49598) and a Cross kit (403220) for 3 x 24 in. cylinders with the same 1.5 in. rod. Work down this list until one answer gives a part number:

  1. The cylinder maker and part number. Look for a stamped or tagged number on the barrel or the base end. Clean it before reading; paint often hides it.
  2. The machine’s cylinder number. On a tractor loader or skid steer, the parts book lists the cylinder by its OEM number. HW Part Store says to order by the front loader’s model number, not the tractor’s.
  3. The bore and rod size. Measure the rod and the barrel’s inside diameter once it’s open; Surplus Center lists Maxim kits this way, such as $14.25 for a 2.5 in. bore and 1.125 in. rod.
  4. The dealer, with the serial number. When nothing else is readable, the machine’s dealer can match the kit to the serial number.
Before you order: a kit that fits one maker’s gland may not fit another’s at the same size. When the cylinder has been replaced before, the machine’s parts book can point to the wrong maker.

Should you buy a genuine or aftermarket rebuild kit?

A genuine hydraulic cylinder rebuild kit from the machine’s dealer is the safest fit; an aftermarket kit is usually cheaper and easier to price. John Deere lists genuine kits such as AH176345 online but showed a price only after a dealer was chosen when we read it on November 16, 2026. Aftermarket prices vary widely for the same fit: two kits listing Kubota part 7J273-63400 cost $36.74 at FridayParts and $99.59 for a Stens kit at OMB Warehouse.

For a cylinder whose maker you know, that maker’s own kit is a third route: Bailey Hydraulics sells Prince’s 3 in. tie-rod kit at $31.47 against a $41.96 list price.

What do hydraulic cylinder repair kits cost?

Hydraulic cylinder repair kits cost $14.25 to $99.59 across the 11 we read on November 16, 2026, with a median of $52.24. Cylinder makers’ kits are listed by bore and rod; machine-model kits by the loader or skid steer they fit.

KitFitsTypePriceSeller
Maxim TC tie-rod seal kit 2045012.5 in. bore, 1.125 in. rodCylinder maker$14.25Surplus Center
Maxim TC tie-rod seal kit 2045074 in. bore, 1.5 in. rodCylinder maker$20.25Surplus Center
Prince tie-rod cylinder seal kit3 in. boreCylinder maker$31.47Bailey Hydraulics
Kubota boom and bucket cylinder kit, replaces 7J273-63400 (aftermarket)LA463, LA513, LA525 and other loadersBy machine model$36.74FridayParts
Bobcat S450 loader lift cylinder kit (aftermarket)S450 loaderBy machine model$38.83HW Part Store
John Deere 300E loader lift cylinder kit (aftermarket)40 mm bore, 25 mm rod; cyl. AH231644, AHC21045By machine model$52.24HW Part Store
Prince Royal welded cylinder seal kit4 in. boreCylinder maker$69.62Bailey Hydraulics
Columbus Hydraulics seal kit RKT1.500-10091.5 in. boreCylinder maker$71.70Surplus Center
Columbus Hydraulics seal kit2 in. boreCylinder maker$82.65Surplus Center
John Deere 540M loader lift cylinder kit (aftermarket)540M loaderBy machine model$94.14HW Part Store
Stens kit, fits Kubota 7J273-63400 (aftermarket)same OEM number as aboveBy machine model$99.59OMB Warehouse
Read on the seller’s page on November 16, 2026, US dollars, before shipping and tax. Every price with its link is in the repair cost data.

How do you fit a new hydraulic cylinder seal kit?

Fitting a new hydraulic cylinder seal kit means removing every old seal with a non-sharp tool, oiling the inner seals and greasing the outer ones, as Surplus Center’s seal replacement sheet sets out. Lay the old seals out in order as they come off, so each new one goes into the groove it replaces and faces the same way. Keep the work clean: the same sheet warns that one small piece of dirt can damage a cylinder.

The full job, from making the machine safe to testing the rebuilt cylinder, is on how to rebuild a hydraulic cylinder, step by step.

Questions about seal kits

Are hydraulic cylinder seal kits universal?

No. A kit fits one cylinder maker’s design for one bore and rod size. Oxbo’s seal kit sheet lists three different kits, from Lion, Prince and Cross, for cylinders of the same 3 x 24 in. size with a 1.5 in. rod.

Can I buy hydraulic cylinder seals one at a time?

Some sellers sell single seals, but the guides we read replace the whole set: Degelman’s repair guide says to inspect and replace all of the seals with new components, which is what a kit holds.

Does a seal kit include the tools?

Usually not. HW Part Store’s John Deere 300E kit adds a gland removal ring, but the seal pick ($1.95 at Surplus Center) and spanner wrench ($50.62 at HW Part Store, read November 16, 2026) are separate.

More on rebuilding a cylinder

How this page was checked

We read each kit’s price on the seller’s own page on November 16, 2026, the contents of a kit from Degelman’s repair guide (version 1.0, March 2016), and the same-size, different-kit example from Oxbo’s seal kit sheet. We didn’t buy or fit these kits. Published by Winding AI, Inc., the company that makes Mechy.